Roll Crusher
Processing Capacity: 3-450 (t/h)
Application Fields: coal, mining, construction, metallurgy, chemical industry.
Applied Material: limestone, slag, coke, coal.
Tel.: +86 13938852499 E-Mail: [email protected]
Overview
This series product is applied to crush various medium hardness materials such as limestone, slag, coal etc. in metallurgy, cement, chemistry and other industries for primary and secondary crushing.
Product Features
1.The crushing ratio can be up to 15%.
2.Simple structure and low costs and much less worn by adopting the principle of stone to stone crushing.
3.the granularity can also be changed without influence by abrasion of hammer and lining.
4.Non grizzly bar, high water content to avoid blocking.
5.Horizontally placed bearing lasts a longer service life.
6.The special design of rotor avoids wear and tear.
7.Lead screw and hydraulic opening deveice are mounted to the hind cavity which helps to replace wearing parts.
Working Principle
There is a wedge-shaped device or gasket adjustment device between the two rolls and on the top of the wedge-shaped device placed an adjusting bolt. When the adjusting bolt pulls up the wedge, the wedge will move the movable roll from the fixed roll, so the gap between the two rolls become large, and the discharging granularity will get big. When the wedge goes down, under the effect of pressure spring, the gap between them become small and the discharging granularity will get small. The gasket device adjusts the granularity of discharging material by increasing or decreasing the number or thickness of the gasket. When the gasket number increases, the gap between the two rolls become large and the discharging granularity will get big. When the gasket number decreases, the gap between the two rolls become small and the discharging granularity will get small.
Technical Parameters
| Type | Model | Feed Size(mm) | Discharge Size(mm) | Capacity(m3/h) | Power | Dimension(mm) | Weight(kg) |
| Strong Double Roller Crusher | 2PGQ 610×400 | <36 | 2-9 | 3-9 | 15×2 | 2085×3090×802 | 4130 |
| 2PGQ 750×500 | <40 | 2-10 | 3-16 | 18.5×2 | 2344×1900×1605 | 9600 | |
| 2PGQ 750×700 | <40 | 2-10 | 5-25 | 22×2 | 2344×2318×1605 | 10650 | |
| 2PGQ 900×500 | <40 | 2-10 | 5-26 | 22×2 | 2750×1956×1662 | 15000 | |
| 2PGQ 900×900 | <40 | 2-10 | 11-45 | ～37×2 | 2750×2356×1662 | 16800 | |
| 2PGQ 900×1200 | <40 | 3-10 | 15-60 | ～55×2 | 2750×2480×2065 | 20800 | |
| 2PGY 1200×1000 | <40 | 3-12 | 15-60 | ～45×2 | 3476×2894×2200 | 39000 | |
| 2PGY 1200×1200 | <40 | 2-12 | 18-68 | ～75×2 | 3476×3117×2200 | 41980 | |
| 4PG Roller Crusher | 4PG750×500 | <30 | 2-4 | 3-10 | 18.5+11/17 | 2760×2105×2650 | 19200 |
| 4PG900×700 | 40-100 | 2-10 | 11-18 | 30+15/24 | 3150×2450×2747 | 28488 | |
| 4PG900×900 | 40-100 | 2-10 | 14-24 | 45+24/37 | 3160×2650×2747 | 29140 | |
| 4PGY1200×1000 | 20-40 | 3-10 | 43-68 | 90+40/55 | 4138×3300×3650 | 6400 | |
| 2PGC Roller Crusher | 2PGC450×500 | 100-200 | 25-100 | 20-55 | <11 | 2368×2206×916 | 3368 |
| 2PGC600×750 | 300-600 | 50-125 | 60-125 | 22 | 2635×2850×1025 | 6612 | |
| 2PGC900×900 | <800 | 75-150 | 100-180 | 30 | 3710×2300×1394 | 13670 | |
| 2PGC1000×800 | 150-400 | 5-150 | 30-150 | 55 | 3480×2300×1360 | 10715 | |
| 2PGC1200×1500 | <200 | <40 | 100-160 | 2×55 | 3370×3500×1945 | 26000 | |
| 2PGC1200×1500 | <150 | <20 | 450-600 | 250×2 | 5890×4220×2370 | 58162 |
Products Photo
