According to the construction design requirement, the powder content of artificial sandstone of sand making machine should be 12-18%. Normally, taking dry method screening, mixing cavity production, mixed production and powder recycle method to control powder content.
1. Dry method screening: This method is used at secondary sorting workshop. The sand which below 5mm should be transported directly to finished sand depot by conveyor. In the process of screening, add dust collector to recycle the powder which mixed in the dust.
2. Mixing cavity production: Vertical shaft impact crusher (sand making machine) has two cavities: stone to iron and stone to stone. The artificial sands produced through stone to iron type content higher powder, but the wear-resistant anvil wear fast in high cost. The sands produced through stone to stone content lower powder without anvil, so the cost is low. As a consequence, the combination of the two cavities cans reasonable control the powder content.
3. Mixed production: Vertical shaft impact crusher and rob mill work together to control powder.
4. Powder recycle: Recycle the powder during production on screening and mixed into finished sand depot. Check it time by time till the powder is 10%-15%.
Luoyang Dahua high quality sand making machine with advanced launching port and smooth internal curve design, reduce the flow resistance of materials, greatly improve the ability of materials through, and then improve the production efficiency of sand making machine. Luoyang Dahua sand making machine max. feed size is 30-60 mm, the processing capacity is 24-715 t/h. If you want to know more information, please contact the Online Service at any time.